|
|
|
|
|
|
|
Open Channel Flowmeter Series UDC
|
|
|
|
|
|
|
|
Open Channel Flowmeter Series UDC
|
|
|
|
The UDC series is a remote version ultrasonic open channel flow meters (O.C.M.). It consists of two elements, a wall mounted host, which has a display and an integral keypad for programming, and a probe, which must be mounted directly above the surface to be monitored....
|
|
|
The UDC series is a remote version ultrasonic open channel flow meters (O.C.M.). It consists of two elements, a wall mounted host, which has a display and an integral keypad for programming, and a probe, which must be mounted directly above the surface to be monitored. Both of the host and the probe are plastic leak-proof structure.
The UDC series (O.C.M.) can be widely applied to the environmental protection, water treatment, irrigation, chemical, and other industries.
BENEFITS
l High detection accuracy, the flow meter measurement changes with 1mm, the accuracy of change in level is 1 mm;
l Suitable for a variety of weirs and flumes, Parshall flumes (ISO), Right-angle triangle weir, Rectangular weir;
l Displays flow rate in L/S or M3/h;
l Excellent anti-interference capability;
l Clear display with enhanced 14 digit two line backlit LCD;
l The cable length between probe and host up to 1000m;
l The probe with leak-proof structure and IP68 protect grade;
l Chemically resistant probe materials for maximum application flexibility;
l Provided 4-20mA output and RS485 serial communication (MODBUS-RTU) output;
l Provided programmable 6 relays at most for alarms, and The pulse output for cumulative flow rate.
l Three button for programming or remote control for easy configuration and operation ( opt.);
UDC series Remote ultrasonic level meter, the use of imported host shell, compact and easy to install, commonly functional, economical and practical is preferred.
TECHNICAL FEATURE OF SERIES UDC
| Host Technical Specification |
Weir&Flume Match |
Parshall Flume; Triangular Weir; Rectangular Weir |
| Level Resolution |
1mm |
| Mode of Indication |
14 Digit LCD in 2 rows with backlight |
| Parameter set up |
3 induction buttons |
| Instantaneous flow range |
0.0000~99999L/S or m3/h |
| Cumulative flow display max. range |
99,999,999.9m3/h |
| Communication Protocol |
RS485 MODBUS-RTU |
| Output Current |
DC4~20mA (Corresponding to instantaneous flow ) |
| Output Load |
0~500Ω |
| Relay Output |
Upper/lower limit alarm and control (instantaneous flow or water level) |
| Accumulated flow pulse output |
| Can be set to high, low or fault alarm |
| Relay Mode |
Normal Open/Normal Close (tunable) |
| Relay Type |
5A 250VAC/30VDC |
| Relay No. |
Up to 6 |
| Power Supply |
DC24V(±5%) 0.2A |
| AC220V(±20%) ,0.1A |
| Measure Cycle |
1.0second(tunable) |
| Temperature compensation |
The whole range is automatic |
| Temperature Range |
-40 ºC ~70 ºC |
| Cable Fix |
PG13.5/PG11/PG9 |
| Crust Material |
ABS |
| Protect Grade |
IP67 |
| Mode Installation |
Wall installation |
| The Probe Technical Specification |
Measuring range |
0.00~4.00m(Level) |
| Dead Zone |
0.20m |
| Beam Angle |
8º(3db) |
| Temperature Range |
-40 ºC ~+75 ºC |
| Sensor Material |
ABS/PVC/PTFE |
| Protect Grade |
IP68 |
| Corrosion resistance |
Resistant to strong corrosion |
| Probe Cable Length |
10m(can be extended to 1000m by order) |
| Installation in cold regions |
Probe lengthened or choose electric heating |
| Mode Installation |
Whorl /Flange/Frame |
|
|
【Back】 |
|
|
Category：Flow measurement
|
|
|
|
|
- Features
- Application
- Download
-
-
-
|
|
|
|
|
|