|
Series
|
TS4-M
|
TS4-C
|
TS4-H
|
TS4-B
|
|
Power
|
AC Power
|
100-240VAC~50/60Hz
|
|
suuply
|
AC/DC Power
|
24VAC~50/60Hz, 24-48VDC=
|
|
Allowable voltage range
|
90 to 110% of rated voltage
|
|
Power
|
AC Power
|
Max. 5VA(100-240VAC 50/60Hz)
|
|
consumption
|
AC/DC Power
|
Max. 5V(24VAC 50/60Hz), Max. 3W(24-48VDC)
|
|
Display method
|
7 segment (PV: red, SV: green), other display part(green, red) LED method
|
|
Character
|
PV(W×H)
|
7.0×15.0mm
|
9.5×20.0mm
|
7.0×14.6mm
|
11.0×22.0mm
|
|
size
|
SV(W×H)
|
5.0×9.5mm
|
7.5×15.0mm
|
6.0×12.0mm
|
7.0×14.0mm
|
|
Input
|
RTD
|
DIN Pt100Ω, Cu50Ω (Allowable line resistance max.5Ω per a wire)
|
|
type
|
TC
|
K(CA), J(IC), L(IC), T(CC), R(PR), S(PR)
|
|
Display accuracy
|
RTD
|
At room temperature(23℃ ± 5℃): (PV ± 0.5% or ±1℃, select the higher one) ± 1 digit Out of room temeperature range: (PV ± 0.5% or ±2℃, select the higher one)± 1 digit For TM4S-□-P, add ±1℃ by accuracy standard.
|
|
TC
|
|
Control
|
Relay
|
250VAC~3A 1a
|
|
output
|
SSR
|
12VDC= ±2V 20mA Max
|
|
Alarm output
|
AL 1, AL2 Relay: 250VAC~ 1A 1a
|
|
Control method
|
ON/OFF control, P, PI, PD, PID control
|
|
Hysteresis
|
1 to 100℃/℉ (0.1 to 50.0℃/℉)
|
|
Proportional band(P)
|
0.1 to 999.9℃/℉
|
|
Integral time(I)
|
0 to 9999 sec.
|
|
Derivative time(D)
|
0 to 9999 sec.
|
|
Control period(T)
|
0.5 to 120.0 sec.
|
|
Manual reset
|
0.0 to 100.0%
|
|
Sampling period
|
100ms
|
|
Dielectric
|
AC power
|
2000VAC 50/60Hz 1 min.(between input terminal and power terminal)
|
|
strength
|
AC/DC Power
|
1000VAC 50/60Hz 1min.(between input terminal and power terminal)
|
|
Vibration
|
0.75mm amplitude at frequency of 5 to 55Hz in each X, Y, Z direction for 2 hours
|
|
Relay life
|
Mechanical
|
OUT: Over 5,000,000 times, AL1/2: Over 5.000,000 times
|
|
cycle
|
Electrical
|
OUT: Over 200,000 times(250VAC 3A resistive load) AL 1/2: Over 300,000 times(250VAC 1A resistive load)
|
|
Insulation resistance
|
Min. 100MΩ(at 500VDC megger)
|
|
Noise
|
Square-wave noise by noise simulator (pulse width 1µs) ±2KV R-phase and S-phase
|
|
Memory retention
|
Approx. 10 years (when using non-volatile semicnductor memory type)
|
|
Environment
|
Ambient temp.
|
-10 to 50℃, Shotage: -20 to 60℃
|
|
Ambient humi.
|
35 to 85%RH, Shotage: 35 to 85%RH
|
|
Insulation type
|
Double insulation or reinforced insulation (mark: dielectric strength between the measuring input part and the power part: AC power 2kV, AC/DC power 1kV)
|
|
Weight
|
Approx. 147g (approx. 100g)
|
Approx. 203g (approx. 133g)
|
Approx. 194g (approx. 124g)
|
Approx. 275g (approx. 179g)
|